i-crafter i-Mend Self Mending Pro Deck

i-crafter has taken the die cutting experience to a whole new, game changing, level! They have invented a cutting pad that resists warping, cracking and scratching making it a long-lasting value. A totally unique, self-mending cutting deck for your manual die cutting machine.

Use this self-mending cutting deck in place of one of your hard cutting decks and experience something totally different.

PRO deck dimensions are 6 1/8 in x 9 in {15.56 cm x 22.5 cm}. Sized to fit manual die cutting machines with a 6 1/8 in wide opening. Sandwich heights may vary so test sandwiches using scrap paper first.

Tested and proven to work with many of the high-pressure, electric die cutting machines

Place the i-Mend Self-Mending PRO Deck on your machine cutting platform, place the material to be cut on top, place your die, blade side down, add one hard cutting deck on top and run this through your die cutting machine. No more warping or cracking sounds as it runs through the machine. 

• Start by using the least amount of pressure. Begin with the basic sandwich required per the machine manufacturer’s instructions.
• If you still need more pressure, add a shim and repeat
• Avoid exposing the i-Mend PRO Deck to heat.

The self-mending PRO deck heals itself and cuts smoothly. Clean the i-Mend PRO Deck with cold water and gentle scrubbing to remove small bits of paper left behind.